Colorlight i9+ Receiver Card is specially design for high-end project, which not only can greatly improve the visual p10 led controller card but also bring convenience for online video processing, loading capacity: 512×384 pixels.
Colorlight i9+ Receiver Card 5A-75 LED receiver card, LED Control System Receiving Card, 256*256 Pixels Indoor/Outdoor Full Color Receiver Synchronous Control Card
ColorLight I9+ Mini Receiving Card Colorlight Receiving Card For Rental LED Display 500×500 LED Screen 1000×500 Features
·Tiny size: 68×36mm, DDR2 SODIMM interface, easy for maintenance
·Supports 32 groups of RGB signal output
·Loading capacity: 512×384 pixels
·Low latency
·Supports Auto-Calibration
·Seam compensation
·Supports 3D display
·Improved grayscale performance at low brightness
·Smart panel marking good for maintenance
·Auto-recognizes sequence of connected receiver cards
·High-precision point-by-point calibration in the Brightness and the chromaticity
·Supports smart module to save calibration coefficients and other information on module
·Temperature, humidity, power supply voltage monitoring on cabinet and fan rotating control
·Cable Detection
·Supports receiver card backup and power supply backup
·Various freeform display designs like spherical display, creative display, etc.
Control system parameters | |
---|---|
Sending device | All of Colorlight’s sending devices |
Capacity | Full-color: 512×384 pixels |
Cascade Control Area of the Largest Region | 65536×65536 pixels |
Network Port Exchange | Supported, arbitrary use |
Gray Level | Maximum 65536 Levels |
Display module compatibility | |
---|---|
Chip Supports | Supports conventional chips, PWM chips, lighting chips and other mainstream chips |
Scan Mode | Two scanning methods to support refresh rate multiplier |
Scan Type | Supports static sweep to 1/32 scan |
Module Specifications Support | Supports 4096 pixels within any row, any column |
Cable Direction | Supports route from left to right, from right to left, from top to bottom, from bottom to top |
Data Sets | 32 RGB data sets |
Data Folded | Supports 1~8 any discount to improve refresh rate. |
Data Exchange | 32 sets of data any exchange |
Module Snapshot | Supports any pumping point |
Compatible device and interface type | |
---|---|
Communication Distance | UTP cable≤140mCAT6 cable≤170m
OPTIC FIBER transmission distance unrestricted |
Compatible with Transmission Equipment | Gigabit switch, fiber converter, optical switches |
Size | 67.6×32.9mm |
Input Voltage | DC 3.3V~6V |
Rated Current | 0.6A |
Rated Power | 3W |
Storage and Transport Temperature | -50℃~125℃ |
Operating Temperature | -25℃~75℃ |
Body Static Resistance | 2KV |
Weight | 9.5g |
Monitoring function (in conjunction with multi-function card) | |
---|---|
Temperature Monitoring | Cabinet temperature monitoring between -25℃ ~ 75℃1 port for each card |
Humidity Monitoring | One port to monitor receiver card humidity range with 20% ~ 95%1 port for each card |
Bit Error Monitoring | Monitoring the total number of data packets and error rate to check network quality |
Supply Voltage Monitoring | 5 ports for supply voltage monitoring |
Smoke Monitoring | One port for smoke monitoring and can work with relay to activate an alarm and turn off the display screen1 port for each card |
Full Color LCD Display Panel | Supports full color LCD display panel |
Pixel level calibration | |
---|---|
Brightness Calibration | Supported |
Chromaticity Calibration | Supported |
Other features | |
---|---|
Hot Backup | Supports loop backup, double sender backup, |
Shaped Screen | Supports various freeform display, spherical display, creative display, etc. through the date arbitrary offset |
Program Backup | Proprietary redundant firmware backup on card no matter how to use, upgrade, send parameters, continuous functionality |
FILE NAME | RELEASE NOTES | FILE SIZE | DOWNLOAD |
---|---|---|---|
i9+ Specification | V3.0 | 758KB |