Colorlight i5A-907 Receiving Card | LED Display Receiver Card i5a

Colorlight i5A-907 Receiving Card is specially designed for the compact and portable led displays, such as rental led screen or casting aluminum cabinet, etc.

This rgb led module controller inherits all the advantages and features i5A series had, adopts a new generation image processing core, and greatly improve the display effect;

Adopts a new generation of system architecture, and possesses more intelligent function and more stable system, with lower screen card price, make its size and interfaces perfectly suit for casting aluminum display.

Colorlight I Series I5A I5A-907 I5A-905 LED Receiving card

Colorlight i5A-907 Receiving Card Colorlight i5A-907 LED Display Receiver Card Features

·Tiny size, special designed for the compact structure designs, like color screen and casting aluminum cabinet.

·Power supply from pin board without the need of external power supply, enhance hardware stability.

·New processing core, perfect in display effect.

·High refresh rate, high gray scale and high brightness with conventional chips.

·Perfect performance under lower grayscale status.

·Better detail processing: Partial dark at row, reddish at low gray, shadow problems can be solved.

·Supports the effective display at first grayscale value.

·Supports 14 bits high-precision point-by-point calibration in the Brightness and chromaticity.

·Supports conventional chips, PWM chips and lighting chips, etc.

·Supports up to 1/64 scan

·Supports any pumping point and data arbitrary offset, and realize various freeform display, spherical display, diamond display, creative display, etc.

·Supports 16 groups RGBR’ signal output and 24 groups RGB in maximum.

·Large loading capacity.

·Advanced design, high quality components, rigorous aging test, zero malfunction of final products.

·Wide working voltage range with DC 3.3~5.5V.

·Supports dual receiving card backup, loop backup, and dual-machine backup, etc.

·Compatible with S series Sender, Z series Sender and C series Sender, etc.

Control system parameters
Sending device	Compatible with S series Sender, Z series Sender and C series Sender, etc
Control area of every card	Full-color: 256×256 pixels, and for special applications the column can be extended to 1024 pixels.
Correction area of every card	256×256 pixels
Cascade control area of the largest regional	65536×65536 pixels
Cascade card number	65536 PCS
Network port exchange	Supported, arbitrary use
Synchronization	Nanosecond synchronization between the card and the card

Display Quality
Refresh rate for conventional chip	Static: 64×64, up to 16000Hz 1/8 scan: 128×128, up to 10000Hz
Serial frequency	0.2MHz~41.7MHz
Gray Level	Maximum 65536 levels
Minimum unit of OE values	8ns, 8ns multiples steps
Blanking Circuit	Supports CD4051 blanking circuit
Gray scale compensation	Each level grayscale compensate separately

Display module compatibility
Chip supports	Supports conventional chips, PWM chips, lighting chips and other mainstream chips
PWM chip supports	Supports hundreds of different specifications of the PWM chip, such as MBI, MY, SUM, etc
Scan mode	Conventional mode and high refresh rate mode to support refresh rate multiplied
Scan type	Supports up to 1/64 scan
Module Specifications Support	Supports 8192 pixels within any row, any column
The direction of the cable	Supports route from left to right, from right to left, from top to bottom, from bottom to top
Data Sets	16 groups RGBR’ parallel data; 24 groups RGB parallel data
Data folded	Supports to fold on the same or opposite direction, which improve refresh rate significantly
Module snapshot	Supports any pumping point
Data serial transmission	RGB, R8G8B8, R16G16B16, etc in the form of serial

Compatible device and interface type
Communication distance	UTP cable≤140m CAT6 cable≤170m Optic fiber: Single Mode Fiber converter≤20km Multi-Mode Fiber converter ≤550m (Use RP Repeater to extend unlimited)
Compatible with transmission equipment	Gigabit switch, fiber converter, optical switches
DC power interface	Wire terminal or HUB board
HUB Interface Type	Refer to signal interface definition below

Physical parameters
Size	137×48mm
Input voltage	DC 3.3V-5.5V
Rated current	0.6A
Rated power	3W
Storage and transport temperature	-50℃~125℃
Operating Temperature	-25℃~75℃
Body static resistance	2KV
Weight	70g

Monitoring function (in conjunction with mutil-function card)
Monitoring functions	Real time monitoring environment information like temperature, humidity, smoke
Remote Control	Supports for relay switch to turn on/off the power supply of equipments remotely

Pixel level calibration
Brightness calibration	Supported
Chromaticity calibration	Supported

Other features
Hot backup	Supports loop backup and dual-machine backup Consult our technicians for more details
Shaped screen	Supports various freeform display, spherical display, creative display, etc. through the data arbitrary offset

Other features

Hot backup

Supports loop backup and dual-machine backup

Consult our technicians for more details

Shaped screen

Supports various freeform display, spherical display, creative display, etc. through the data arbitrary offset