Colorlight i5A-905 LED Display Receiving Card S8 S16 S4 S2 Box

Colorlight i5A-905 LED Display Receiving Card is specially designed for the compact and portable card with video screen, such as led color screen or casting aluminum cabinet, etc.

It inherits all the advantages and features i5A had. Meanwhile, i5A-905 possesses colorlight unique dual receiving card backup technique, to support one cabinet with two receiving cards, mutual backup, more reliable in the key moment, and you will get moderate receiver card price online.

Colorlight i5A-905 LED Video Screen Display Receiver Card need Colorlight LEDVISION Software to configure,please check the following software and manual

Colorlight i5A-905 LED Receiving Card, With Stable Quality, Easy Operation, Fast Tech Response for after sale service

Colorlight i5A-905 LED Display Receiving Card Features

·Tiny size, special designed for the compact structure designs, like color screen and casting aluminum cabinet.

·Power supply from pin board without the need of external power supply, enhance hardware stability.

·New processing core, perfect in display effect.

·High refresh rate, high gray scale and high brightness with conventional chips.

·Perfect performance under lower grayscale status.

·Better detail processing: Partial dark at row, reddish at low gray, shadow problems can be solved.

·Supports the effective display at first grayscale value.

·Supports 14 bits high-precision point-by-point calibration in the Brightness and chromaticity.

·Supports conventional chips, PWM chips and lighting chips, etc.

·Supports any scan mode from static to 1/32 scan.

·Supports any pumping point and data arbitrary offset, and realize various freeform display, spherical display, diamond display, creative display, etc.

·Supports 16 groups RGBR’ signal output and 24 groups RGB in maximum.

·Large loading capacity.

·Advanced design, high quality components, rigorous aging test, zero malfunction of final products.

·Wide working voltage range with DC 3.3~6V.

·Supports dual receiving card backup, loop backup, and dual-machine backup, etc.

·Compatible with Gigabit NIC, S series Sender, Z series Sender and C series Sender, etc.

Control system parameters
Sending device	Compatible with Gigabit NIC, S series Sender, Z series Sender and C series Sender, etc
Control area of every card	Full-color: 256×256 pixels, and for special applications the column can be extended to 1024 pixels.
Correction area of every card	256×256 pixels
Cascade control area of the largest regional	65536×65536 pixels
Cascade card number	65536 PCS
Network port exchange	Supported, arbitrary use
Synchronization	Nanosecond synchronization between the card and the card

Display Quality
Refresh rate for conventional chip	Static: 64×64, up to 16000Hz 1/8 scan: 128×128, up to 10000Hz
Serial frequency	0.2MHz~41.7MHz
Gray Level	Maximum 65536 levels
Minimum unit of OE values	8ns, 8ns multiples steps
Blanking Circuit	Supports CD4051 blanking circuit
Gray scale compensation	Each level grayscale compensate separately

Display module compatibility
Chip supports	Supports conventional chips, PWM chips, lighting chips and other mainstream chips
PWM chip supports	Supports hundreds of different specifications of the PWM chip, such as MBI, MY, SUM, etc
Scan mode	Conventional mode and high refresh rate mode to support refresh rate multiplied
Scan type	Supports static sweep to 1/32 scan
Module Specifications Support	Supports 4096 pixels within any row, any column
The direction of the cable	Supports route from left to right, from right to left, from top to bottom, from bottom to top
Data Sets	Different sets in different work modes, refer to interface definitions
Data folded	Supports to fold on the same or opposite direction, which improve refresh rate significantly
Module snapshot	Supports any pumping point
Data serial transmission	RGB, R8G8B8, R16G16B16, etc in the form of serial

Compatible device and interface type
Communication distance	UTP cable≤140m CAT6 cable≤170m Optic fiber: Single Mode Fiber Converter≤20km Multi-Mode Fiber Converter ≤550m (Use RP Repeater to extend unlimited)
Compatible with transmission equipment	Gigabit switch, fiber converter, optical switches
DC power interface	Wire terminal or HUB board
HUB Interface Type	Refer to signal interface definition below

Physical parameters
Size	137×48mm
Input voltage	DC 3.3V~6V
Rated current	0.6A
Rated power	3W
Storage and transport temperature	-50℃~125℃
Operating Temperature	-25℃~75℃
Body static resistance	2KV
Weight	70g

Monitoring function (in conjunction with mutil-function card)
Monitoring functions	Real time monitoring environment information like temperature, humidity, smoke
Remote Control	Supports for relay switch to turn on/off the power supply of equipments remotely

Pixel level calibration
Brightness calibration	Supported
Chromaticity calibration	Supported

Other features
Dual Receiving Card Backup	Supports one cabinet with two receiving card Consult our technicians for more details
Hot backup	Supports loop backup and dual-machine backup
Shaped screen	Supports various freeform display, spherical display, creative display, etc. through the data arbitrary offset

Other features

Dual Receiving Card Backup

Supports one cabinet with two receiving card

Consult our technicians for more details

Hot backup

Supports loop backup and dual-machine backup

Shaped screen

Supports various freeform display, spherical display, creative display, etc. through the data arbitrary offset